Digital wireless stage audio monitoring system
<
>
Digital wireless stage audio monitoring system
This system is easy to set up, optimizes sound quality, and is plug-and-play. After powering on, the transmitter and receiver will automatically pair.Simple setup, multiple uses. Suitable for stages, recording studios, band rehearsals, and live performances
Consult Now
Consultation Phone：
+86 755 8386 6822
Digital Wireless Stage Audio Monitoring SystemSuitable for stages, recording studios, band rehearsals, and live performances.
Transmitter:
•Frequency range: 2400MHz~2483MHz
•Power: DC 5V / 500mA
•Transmission power: ≤20dB
•Operating range: 30 meters
Receiver:
•Frequency range: 2400MHz~2483MHz
•Power: DC 3V (2 AA batteries)
•Frequency response: 20Hz~20KHz
•Signal-to-noise ratio: 89dB
•Distortion: 1.5 %@1KHz
Headphones:
•Frequency Response: 20Hz~22000Hz
•Impedance: 16Ω
•Sensitivity: 110dB
•Frequency range: 2400MHz~2483MHz
•Power: DC 5V / 500mA
•Transmission power: ≤20dB
•Operating range: 30 meters
Receiver:
•Frequency range: 2400MHz~2483MHz
•Power: DC 3V (2 AA batteries)
•Frequency response: 20Hz~20KHz
•Signal-to-noise ratio: 89dB
•Distortion: 1.5 %@1KHz
Headphones:
•Frequency Response: 20Hz~22000Hz
•Impedance: 16Ω
•Sensitivity: 110dB
·2.4GHz is a globally legal and free ISM band.
·Unlike analog signals from UHF devices, 2.4GHz enables digital transmission.
·The sampling rate is 64K@16bit * 2, which we call HDCD sound.
·Latency: 1.1~2ms, the shortest in this field.
·The actual measured signal-to-noise ratio is 89dB, and the actual measured distortion is 1.5%.
·Supports up to 6 units simultaneously without interference.
·Multiple receivers can operate with a single transmitter within the working range.
·The receiver was adopted by APEC2014 for simultaneous interpretation and deployment personnel.
·Unlike analog signals from UHF devices, 2.4GHz enables digital transmission.
·The sampling rate is 64K@16bit * 2, which we call HDCD sound.
·Latency: 1.1~2ms, the shortest in this field.
·The actual measured signal-to-noise ratio is 89dB, and the actual measured distortion is 1.5%.
·Supports up to 6 units simultaneously without interference.
·Multiple receivers can operate with a single transmitter within the working range.
·The receiver was adopted by APEC2014 for simultaneous interpretation and deployment personnel.